Configuring connection types in Space
Introducción
When adding a door to the system, you must specify the appropriate connection type: online or offline. When you select an online connection type, the door is displayed on the SALTO Network screen, and you can click the entry to configure it.
There are two online connection types:
- Online IP (CU5000)
- Online IP (CU4200) <!-- TODO: not included in SPABASIC
- Online RF (SALTO)
- Online RF (BAS integration)
Your BAS integration must be fully configured in System > General options before you can select this option. See BAS tab for more information.
See Connection types for more information about selecting the correct connection types in non-hotel sites.
Online IP (CU5000)
To configure an online IP (CU5000) door, do the following:
Select System > SALTO Network. The SALTO Network screen is displayed.
Click on the online IP (CU5000) door that you want to configure. The Access point: Online IP (CU5000) information screen is displayed.
The connection type is displayed when you hover the mouse pointer over the icon beside the door name in the Name column. Online IP (CU5000) doors are online SVN points.
'Access point: online IP (CU5000)' information screen
Type an IP address for the door in the IP address field.
Click Add (+) in the ESD panel. The Add dialog box, showing a list of ESDs, is displayed. See Energy Saving Devices for more information about ESDs.
Select the required ESDs. You can hold down the Ctrl key while clicking the ESDs to make multiple selections.
Click Save & Close. The selected ESD is displayed in the ESD panel.
Save the changes and click on Back to SALTO Network to return to the SALTO Network screen.
Online IP (CU4200)
To configure an online IP (CU4200) door, do the following:
Select System > SALTO Network. The SALTO Network screen is displayed.
Click the online IP (CU4200) door that you want to configure. The Online IP (CU 4200) information screen is displayed.
The connection type is displayed when you hover the mouse pointer over the icon beside the door name in the Name column. Online IP (CU4200) doors that are not connected to CU4200 nodes are displayed in the Unreachable items tab. See CU4200 nodes for more information about CU4200 nodes.
'Access point: online IP (CU4200)' information screen
Select the CU4200 node to which you want to connect the door from the Connected to drop-down list.
Select either 1 or 2 from the Access point number drop-down list. You cannot select 2 unless you have selected 2 in the Access point count drop-down list on the CU4200 node information screen. Otherwise, this exceeds the door number count for the node.
Save the changes and click on Back to SALTO Network to return to the SALTO Network screen. <!-- TODO: not in SPABASIC
Online RF (SALTO)
To configure an online RF (SALTO) door, perform the following steps:
Select System > SALTO Network. The SALTO Network screen is displayed.
Click the online RF (SALTO) door that you want to configure. The Online RF (SALTO) information screen is displayed.
The connection type is displayed when you hover the mouse pointer over the icon beside the door name in the Name column. Online RF (SALTO) doors that are not yet connected to RF nodes are displayed in the Unreachable items tab. See RFnet/BLUEnet nodes for more information about RF nodes.
'Online RF (SALTO)' information screen
Select the RF node to which you want to connect the door from the Connected to drop-down list.
Save the changes and click on Back to SALTO Network to return to the SALTO Network screen. -->
Atrás
Filtering data
Online connection types