Universal Module V3 app guide

Before adding your Universal Module V3 in the Danalock app, you need to create a Danalock account or sign in to your existing one.

You can find a guide on how to create a Danalock account on in the Danalock app guide.

How to add the Universal Module in the Danalock app

Once signed into your account in the Danalock app, you can add the module by following the steps below:

• Go to Menu > Add new device.
• The app will scan for available devices and display them by serial number.
• You can find a guide on how to locate the serial number on the General information page.
• Press on the serial number of the Universal Module.
• During the adding process, the Universal Module's firmware will be updated if a new version is available, and you'll have the option to name the module.

Universal Module settings

After adding the module to your account, you can go to Settings to configure the Relay settings and connect the module with a Danapad or Danabridge.

Press on the 'Settings icon' in the keychain to see the different settings available for the module

In Settings, you can view the module's serial number, see and change its name, and check which firmware version is installed. You can also update the firmware if a newer version is available.

You can find information about Firmware and how to update on the General information page.

In 'Settings' you will be able to see the details of the module and configure it

Auto unlock

You can enable Auto Unlock for the module. This feature allows the module to unlock the door when you enter a predefined Auto Unlock zone.

You can find further details and a guide on how to enable Auto unlock in the Danalock app guide.

PIN codes

If you have a Danapad paired with the module, you will be able to go to PIN codes via Settings.

You can find a step-by-step guide on how to set PIN codes in the Danapad app guide.

Relay settings

In Relay settings you can configure the two relays on the Universal Module.

You can adjust how long each relay stays active. It can be set in milliseconds, seconds, minutes, or continuously. You can also set a delay for each relay.

The Relay settings screen looks different in the Danalock app for iOS and Android. Below, you can see how it appears in each app.

'Relay settings' in the Danalock app for Android

'Relay settings' in the Danalock app for iOS

Pair with accessories devices

In Settings you will be able to pair the Universal Module with a Danapad and Danabridge.

Press the type of device you want to pair the module with, and choose the device from the list that appears.

Delete Universal Module

If you want to delete the module from your Danalock account, you can do this by pressing Delete device and confirm the deletion.