Mobile App - Commissioning
The XS4 Sense mobile app makes it easy to set up, configure, and manage your energy saving system. Installers can commission devices, connect them to the controller, and define how the system should work. Once configured, administrators and operators can use the app to monitor system status, check device health, and manage daily operations in real time. All from their smartphone.
Dashboard & Monitor
Download XS4 Sense mobile application
 | iOS |
 | Android |
Description
The XS4 Sense Mobile app is divided into three distinct sections:
Connection Setup, System Configuration and Monitoring and Administration.
Connection Setup
This section is used by installers and administrators to connect the XS4 Sense system to the local XS4 Sense Server and the XS4 Sense Cloud.
About / Settings
XS4 Sense Server Setting
- Click the gear icon to open the About / Settings section. In the Appliance server URL field, enter the IP address shown at the end of the server services installation process IP Address
It is important to enter the address in the following format, making sure to include the port 5555 at the end: i.e http://10.33.191.50:5555
- If the XS4 Sense server is running, press CHECK CONNECTION to verify that the server is reachable. Make sure that the smartphone you are using is connected to a Wi-Fi network that can access the XS4 Sense server.
XS4 Sense Cloud Setting
- Click the gear icon to open the About / Settings section.
In the XS4 Sense Cloud URL field:
https://xs4sense.saltosystems.comtogether with the received credentials.
Enter the credentials provided for commissioning activities. These can be generated from the Cloud Portal and are available in the Cloud Users section. The required access level for this user is Level 1. If you need to perform offline commissioning, you can skip the cloud authentication step.
By pressing CHECK CONNECTION, you can verify that the smartphone can reach the XS4 Sense cloud and authenticate successfully.
Press SAVE CONFIGURATION to complete the setup and save your changes.
Controller Settings
Through this section, you can modify the controller behaviors, define the sources, and set the basic parameters for the Wi-Fi connection.
Controller Settings
| Function | Description |
|---|---|
| Assign a Room | Defines the room number, floor, and block. If the system is connected to SPACE BAS use the same Room Number on both sides. |
| Server URL | Address used by the controller to communicate with the XS4 Sense service. |
| IP/DHCP | Network settings for enabling and configuring either a dynamic or static IP address. |
| Wi-Fi | Configuration of the Wi-Fi network to be used by the controller. |
| Door Status Source | The system allows defining the source of the door status information. The following options are available: - Digital Input 1 - Digital Input 2 - BLE Sensor - InRoomNode. |
| Window Status Source | The system allows defining the source of the window status information. The following options are available: - Digital Input 1 - Digital Input 2 - BLE Sensor. |
| Energy Saving mode | The system allows enabling or disabling the function that saves energy when the room is not occupied by the guest. |
| Digital inputs | Through this setting, the system allows defining whether the digital inputs operate in Normal Open (NO) or Normal Closed (NC) mode. The default setting is Normal Open. |
| Multisensor 1 | Menu dedicated to the configuration of Multisensor 1, allowing you to define the behavior of - Sending IR commands - Setting a temperature correction offset - Adjusting the sensor sensitivity level. |
| Multisensor 2 | Menu dedicated to the configuration of Multisensor 2, allowing you to define the behavior of - Sending IR commands - Setting a temperature correction offset - Adjusting the sensor sensitivity level. |
Controller Settings Expert mode
Click ENABLE EXPERT MODE. This section enables a set of advanced settings that allow changing sensitive parameters. Incorrect configuration may compromise the proper operation of the device. Change the values only if you are fully aware of the impact.
| Function | Description |
|---|---|
| Relays | The relay behavior is defined according to the changes in the room status, such as window open/closed, or transitions from Occupied to Tentatively Occupied and Unoccupied. For each of these conditions, the desired behavior can be configured. |
| Controller TX power level | Defines the transmission power level of the Wi-Fi connection in [dBm]. |
| IR signal repeats | Indicates the number of IR command repetitions sent by the Multisensor. |
| BLE device absence | Maximum time after which, if the system no longer receives information from the BLE devices, the device is considered unreachable and an alarm is triggered in [minutes]. |
| Multisensor Battery Low | The value in [millivolts] below which the battery is considered low. |
| Door sensor Battery Low | The value in [millivolts] below which the battery is considered low. |
| Preliminary occupation detection | Duration started from door close event to set room as tentatively unoccupied in [minutes]. |
| Occupancy detection | Duration started from door close event to set room as unoccupied in [minutes]. |
| False occupancy check | Duration from the last motion event to decide room is unoccupied in [hours]. |
| Balcony/window delay | Duration to trigger action from balcony/window open time in [seconds]. |
Controller Details
The mobile application includes a page called DETAILS to display all the behaviors of the controller and its sensors. Through this section, it is possible to check for any unexpected behaviors.
Bluetooth
| Function | Description |
|---|---|
| Mac | The controller MAC Address used for Bluetooth communication is displayed. |
| Signal level | Signal strength of the connection between the controller and the connected smartphone. |
Network Information
| Function | Description |
|---|---|
| Mac | The controller MAC Address used for Wi-Fi communication is displayed. |
| Connected | Wi-Fi connection status. A green dot is shown when connected, and a grey dot when disconnected. |
| DHCP | Status of the DHCP functionality. A green dot indicates it is enabled, a grey dot indicates it is disabled. |
| Signal level | Signal strength of the connection between the controller and the connected access point. |
| IP | IP address assigned to the controller, obtained from the DHCP service or set manually. |
| Mask | Refers to the Subnet Mask. |
| Gateway | Address of the network device that allows the controller to communicate with devices outside the local network. |
Appliance server availability
| Function | Description |
|---|---|
| Connected | Connection status between the XS4 Sense controller and the server. A green dot is shown when connected, and a grey dot when disconnected. |
| Server URL | Server URL is the address used by the controller to connect to the XS4 Sense server. i.e http://ip_address:5555 |
inRoomNode
| Function | Description |
|---|---|
| Connected | Connection status between the XS4 Sense controller and the inRoomNode. A green dot is shown when connected, and a grey dot when disconnected. |
| Door Status | Indicates the door status: grey icon door closed, red icon door open. |
| Communication with lock | Indicates the communication status between the electronic look and the inRoomNode module. A green dot is shown when connected, and a grey dot when disconnected. |
| Privacy | Indicates the activation of the deadbolt by the guest. A green dot indicates it is active, a grey dot indicates it is inactive. |
| Passage mode | Status about the function set by Salto Space |
| Battery | Indicates the battery status of the electronic lock. If the icon is red, it means the battery level is low. |
| Emergency mode | Status about the function set by Salto Space |
| Door left open | Indicates an alarm situation where the door, after being properly opened, has been left open beyond the allowed time. |
| Intrusion alarm | Indicates that the door has been opened without an authorized sequence, either from the inside or through an unauthorized opening. |
| Last card key operation | Indicates the status of the last access, specifying whether it was made by a Guest or by Staff, and displays any unauthorized access attempt. |
Operational details
| Function | Description |
|---|---|
| Check-in | Indicates the current status of the controller. A grey dot means check-out, a blue dot means check-in. The information is received either from a PMS system or from the webhook integration with Space. |
| Digital input 1 | Indicates the status of digital input 1. Grey dot input open, blue dot input closed. |
| Digital input 2 | Indicates the status of digital input 2. Grey dot input open, blue dot input closed. |
| Relay 1 State | Indicates the status of relay 1. Grey dot relay not activated, blue dot relay activated. |
| Relay 2 State | Indicates the status of relay 2. Grey dot relay not activated, blue dot relay activated. |
| Door status | Indicates the door status: blue dot door closed, grey dot door open. |
| Window/balcony status | Indicates the window status: blue dot window closed, grey dot window open. |
| Door status source | Indicates which source has been assigned to the door function, choosing between digital input 1/2, BLE sensor, or inRoomNode. |
| Window status source | Indicates which source has been assigned to the window function, choosing between digital input 1/2 or BLE sensor. |
| Energy saving | Indicates which status has been assigned, choosing between Enable or Disable. |
| Room occupancy | Indicates room occupancy status, obtained from the occupancy logic. Grey dot room not occupied, blue dot room occupied. |
| Room tentatively unoccupied | Indicates the state where the room is considered potentially unoccupied. It is triggered when the preliminary occupation detection time expires and remains active until the end of the occupancy detection period. Grey dot status active, blue dot status inactive. |
| Motion | Indicates the motion detection status inside the room, based on the Multisensor. Grey dot no detection, blue dot detection. |
| Occupancy downcount | Indicates the remaining time, in seconds, before the room status changes from occupied to unoccupied if no motion is detected. |
| Preliminary occupancy detection | Indicates the duration, in minutes, starting from the door close event until the room is set as tentatively unoccupied. |
| Occupancy detection | Indicates the duration started from door close event to set room as unoccupied in minutes [m]. |
| False occupancy check | Indicate the duration from the last motion event to decide room is unoccupied in hours [h]. |
| Balcony/window delay | Indicate the duration to trigger action from balcony/window open time in seconds [s]. |
| Controller TX Power level | Indicates the value of the configured Wi-Fi transmission power [dBm]. |
| Input voltage | Indicates the value of the supply voltage input to the controller [Volt]. |
| Current | Indicates the value of the instantaneous current measured by the controller [Ampere]. |
| Instant power | Indicates the value of the instantaneous power measured by the controller [Watt]. |
Operational details sensors
Multisensor details
Each connected sensor communicates the following details, useful for diagnostics and maintenance.
| Function | Description |
|---|---|
| Online status | Indicates the connection status of the sensor with the controller. Green dot indicates connected, grey dot indicates not connected, yellow triangle indicates the sensor is registered but not reachable by the controller. |
| Motion | Indicates the status of the Multisensor in detecting presence in the room. Grey dot no presence, blue dot presence detected. |
| Sensibility | Indicates the level of sensitivity of PIR device LOW, MED, HIGH. The default value is HIGH. |
| Battery level | Indicates the battery charge value in millivolts [mVolt]. The icon turns red when the charge level falls below the threshold set in the configuration. |
| Ambient temperature | Indicates the temperature value measured by the Multisensor, expressed in degrees Celsius [°C]. |
| Ambient humidity | Indicates the humidity [%] value measured by the Multisensor. |
| TX power level | Indicates the transmission power value set in the sensor. |
| Signal level | Indicates the BLE signal value received by the sensor. |
| MAC | Indicates the sensor MAC address. |
Door/Window details
Each connected sensor communicates the following details, useful for diagnostics and maintenance.
| Function | Description |
|---|---|
| Online status | Indicates the connection status of the sensor with the controller. Green dot indicates connected, grey dot indicates not connected, yellow triangle indicates the sensor is registered but not reachable by the controller. |
| Open/Close | Indicates the door or window opening status. |
| Battery level | Indicates the battery charge value in millivolts [mVolt]. The icon turns red when the charge level falls below the threshold set in the configuration. |
| TX power level | Indicates the transmission power value set in the sensor. |
| Signal level | Indicates the BLE signal value received by the sensor. |
| MAC | Indicates the sensor MAC address. |
Back
