Aplicación móvil: monitorización
La aplicación móvil es la herramienta principal para supervisar el sistema XS4 Sense. Te permite ver el estado de cada controlador y sensor instalado y evaluar cualquier acción correctiva necesaria para optimizar el rendimiento del sistema.
Descarga la aplicación móvil XS4 Sense
 | iOS |
 | Android |
Iniciar sesión
Usa tus credenciales para iniciar sesión. Dependiendo del nivel de autorización asociado a tu cuenta, puedes ver el sistema, gestionarlo y poner en marcha nuevos controladores con sus correspondientes sensores.
Inicio de sesión en la aplicación móvil
Panel de control
A través del panel de control proporcionado, es posible ver una descripción general del consumo total de energía y los ahorros del sistema. Los filtros te permiten definir el rango de datos que se mostrará, seleccionando un período de tiempo específico, una sola habitación o un grupo de habitaciones.
Panel de control de la aplicación móvil
Monitorizar
La pantalla Monitorizar de la aplicación móvil XS4 Sense permite ver el estado en tiempo real de todas las habitaciones configuradas en el sistema. Cada tarjeta representa una habitación identificada por su número y muestra la información operativa principal, que incluye:
Estado de ocupación (icono de persona)
Estado de la puerta (icono de puerta abierta o cerrada)
Estado de la ventana (icono de ventana/balcón abierta o cerrada)
Intensidad de la señal WiFi (el icono rojo significa que no hay conexión con el controlador)
Alerta de nivel de pila (el icono rojo significa nivel de pila bajo)
Posibles advertencias o errores de comunicación
Las celdas azules indican las habitaciones que están ocupadas, mientras que las celdas grises representan las habitaciones desocupadas.
Monitorizar desde la aplicación móvil
Detalles de la habitación
Al hacer clic en una habitación específica, es posible ver su estado detallado y sus parámetros operativos. En la pantalla principal, las funciones más relevantes se muestran de forma resumida, mientras que en la sección Detalles de la habitación se muestra toda la información relacionada con el controlador XS4 Sense y sus sensores conectados.
Pantalla principal
En esta sección de la aplicación se muestra el estado general y el estado operativo de cada habitación de una manera clara e intuitiva.
Monitorizar una sola habitación en la aplicación móvil
| Icono | Descripción |
|---|---|
| Icono de persona | El icono puede tener dos estados: azul cuando la habitación está ocupada y gris cuando la habitación está desocupada. |
| Icono de Wifi | El icono indica el nivel de señal WiFi con cuatro estados: alta, media, baja y sin señal. Cuando se muestra el icono de falta de señal, significa que el controlador está fuera de línea. |
| Icono multisensor | Muestra el estado de movimiento detectado por el sensor e informa de cualquier alarma de batería baja o sensores registrados pero desconectados. |
| Icono de puerta | Muestra el estado de la puerta, abierta o cerrada, e informa de cualquier alarma de batería baja o sensores registrados pero desconectados. |
| Icono de ventana | Muestra el estado de la ventana/balcón (abierta o cerrada) e informa de cualquier alarma de batería baja o sensores registrados pero desconectados. |
Detalles de la habitación
En esta sección de la aplicación, se muestra el estado detallado de la habitación seleccionada junto con todos los sensores conectados. Esta sección es útil para verificar con precisión el estado de cada sensor y el funcionamiento adecuado del sistema.
Monitorizar una sola habitación desde el móvil en XS4 Sense
Ten cuidado al navegar dentro de este menú, ya que puedes modificar involuntariamente el comportamiento en tiempo real del controlador XS4 Sense, sus sensores o la configuración predeterminada definida durante la puesta en marcha.
XS4 Sense Dashboard details section
| Icon | Description |
|---|---|
| Check-in | Indicates the current status of the controller. A grey dot means check-out, a blue dot means check-in. The information is received either from a PMS system or from the webhook integration with Space. |
| Digital input 1 | Indicates the status of digital input 1. Grey dot input open, blue dot input closed. |
| Digital input 2 | Indicates the status of digital input 2. Grey dot input open, blue dot input closed. |
| Relay 1 State | Indicates the status of relay 1. Grey dot relay not activated, blue dot relay activated. Only Local Users with the Engineering role can override the settings. |
| Relay 2 State | Indicates the status of relay 2. Grey dot relay not activated, blue dot relay activated. Only Local Users with the Engineering role can override the settings. |
| Door status source | Indicates which source has been assigned to the door function, choosing between digital input 1/2, BLE sensor, or inRoomNode. Only Local Users with the Engineering role can modify the settings. |
| Window status source | Indicates which source has been assigned to the window function, choosing between digital input 1/2 or BLE sensor. Only Local Users with the Engineering role can modify the settings. |
| Energy saving mode | Indicates which status has been assigned, choosing between Enable or Disable. Only Local Users with the Engineering role can modify the settings. |
| Door status | Indicates the door status: blue dot door closed, grey dot door open. |
| Window/balcony status | Indicates the window status: blue dot window closed, grey dot window open. |
| Room occupancy | Indicates room occupancy status, obtained from the occupancy logic. Grey dot room not occupied, blue dot room occupied. Only Local Users with the Engineering role can override the settings. |
| Room tentatively unoccupied | Indicates the state where the room is considered potentially unoccupied. It is triggered when the preliminary occupation detection time expires and remains active until the end of the occupancy detection period. Grey dot status active, blue dot status inactive. |
| Motion | Indicates the motion detection status inside the room, based on the Multisensor. Grey dot no detection, blue dot detection. |
| Preliminary occupancy detection | Indicates the duration, in minutes, starting from the door close event until the room is set as tentatively unoccupied. Only Local Users with the Engineering role can modify the settings. |
| Occupancy detection | Indicates the duration started from door close event to set room as unoccupied in minutes [m]. Only Local Users with the Engineering role can modify the settings. |
| Balcony/window delay | Indicate the duration to trigger action from balcony/window open time in seconds [s]. Only Local Users with the Engineering role can modify the settings. |
| False occupancy check | Indicate the duration from the last motion event to decide room is unoccupied in hours [h]. Only Local Users with the Engineering role can modify the settings. |
| BLE device absence | Maximum time after which, if the system no longer receives information from the BLE devices, the device is considered unreachable and an alarm is triggered in [minutes]. Only Local Users with the Engineering role can modify the settings. |
| Multisensor Battery Low | The value in [millivolts] below which the battery is considered low. Only Local Users with the Engineering role can modify the settings. |
| Door sensor Battery Low | The value in [millivolts] below which the battery is considered low. Only Local Users with the Engineering role can modify the settings. |
| Input voltage | Indicates the value of the supply voltage input to the controller [Volt]. |
| Current | Indicates the value of the instantaneous current measured by the controller [Ampere]. |
| Instant power | Indicates the value of the instantaneous power measured by the controller [Watt]. |
inRoomNode
XS4 Sense Dashboard inRoomNode informations
| Function | Description |
|---|---|
| Connected | Connection status between the XS4 Sense controller and the inRoomNode. A green dot is shown when connected, and a grey dot when disconnected. |
| Door Status | Indicates the door status: grey icon door closed, red icon door open. |
| Communication with lock | Indicates the communication status between the electronic lock and the inRoomNode module. A green dot is shown when connected, and a grey dot when disconnected. |
| Privacy | Indicates the activation of the deadbolt by the guest. A green dot indicates it is active, a grey dot indicates it is inactive. |
| Passage mode | Status about the function set by Salto Space |
| Battery | Indicates the battery status of the electronic lock. If the icon is red, it means the battery level is low. |
| Emergency mode | Status about the function set by Salto Space |
| Door left open | Indicates an alarm situation where the door, after being properly opened, has been left open beyond the allowed time. |
| Intrusion alarm | Indicates that the door has been opened without an authorized sequence, either from the inside or through an unauthorized opening. |
| Last card key operation | Indicates the status of the last access, specifying whether it was made by a Guest or by Staff, and displays any unauthorized access attempt. |
Multisensor 1/2 details
XS4 Sense Dashboard multisensors informations
Each connected sensor communicates the following details, useful for diagnostics and maintenance.
| Function | Description |
|---|---|
| Online status | Indicates the connection status of the sensor with the controller. Green dot indicates connected, grey dot indicates not connected, yellow triangle indicates the sensor is registered but not reachable by the controller. |
| Motion | Indicates the status of the Multisensor in detecting presence in the room. Grey dot no presence, blue dot presence detected. |
| Sensibility | Indicates the level of sensitivity of PIR device LOW, MED, HIGH. The default value is HIGH. Only Local Users with the Engineering role can modify the settings. |
| Battery level | Indicates the battery charge value in millivolts [mVolt]. The icon turns red when the charge level falls below the threshold set in the configuration. |
| Ambient temperature | Indicates the temperature value measured by the Multisensor, expressed in degrees Celsius [°C]. |
| Temperature offset | Setting a temperature correction offset [°C]. Only Local Users with the Engineering role can modify the settings. |
| Ambient humidity | Indicates the humidity [%] value measured by the Multisensor. |
| TX power level | Indicates the transmission power value set in the sensor. Only Local Users with the Engineering role can modify the settings. |
| Signal level | Indicates the BLE signal value received by the sensor. |
Door 1 / Window 1 to 3 details
XS4 Sense Dashboard door/window informations
Each connected sensor communicates the following details, useful for diagnostics and maintenance.
| Function | Description |
|---|---|
| Online status | Indicates the connection status of the sensor with the controller. Green dot indicates connected, grey dot indicates not connected, yellow triangle indicates the sensor is registered but not reachable by the controller. |
| Open/Close | Indicates the door or window opening status. |
| Battery level | Indicates the battery charge value in millivolts [mVolt]. The icon turns red when the charge level falls below the threshold set in the configuration. |
| TX power level | Indicates the transmission power value set in the sensor. Only Local Users with the Engineering role can modify the settings. |
| Signal level | Indicates the BLE signal value received by the sensor. |
Use caution when navigating within this menu, as you may unintentionally modify the real-time behavior of the XS4 Sense Controller, its sensors, or the default settings defined during the commissioning.