Mounting the Danapad V3

Below you will find a step-by-step guide on how to mount the Danapad V3.

Mounting tools

Before you start the mounting process, we advise you to make sure to have the tools ready. To be able to mount the Danapad V3, you need to use the following tools:

• A standard cross-shaped screwdriver (PH type) used for most screws.
• A drill.

The mounting kit

In the box with the Danapad, you will find a mounting kit.

The kit contains:

• A black mounting plate.
• Two mounting screws.
• Two rawlplugs.

The Danapad box includes the spare parts shown above

Attach the mounting plate

The following steps will show you have to install the mounting plate on the wall.

1. Hold the mounting plate in place and mark the two hole positions with a pencil.

Mark the two hole positions with a pencil

2. Remove the mounting plate and use a drill to make the two holes.

Make the two holes with a drill

3. Once the holes have been made, insert the two rawlplugs.

Insert the two rawlplugs in the holes

4. Attach the mounting plate to the wall using the two screws and a screwdriver.

Screw the mounting plate to the wall

5. Attach the Danapad to the mounting plate by aligning the small hole in the black ring with the metal spring on the mounting plate.

Align the small hole in the Danapad's black ring with the metal spring on the mounting plate to attach it

• To make sure the Danapad is attached, twist the Danapad onto the mounting plate.

Twist the Danapad on the mounting plate to make sure it's attached

• The Danapad is attached to the mounting plate once the metal spring makes a clicking sound.

As soon as the metal spring clicks, the Danapad is in place on the mounting plate

Dismount Danapad

If you later want to remove the Danapad, follow these steps:

1. Insert a screwdriver into the small hole in the Danapad's black ring.

Insert a screwdriver into the small hole in the Danapad

2. Once the screwdriver is inserted, twist the Danapad to detach it from the mounting plate.