Danalock release notes November 2023

New Z-Wave parameters and PIN code improvements Universal Module V3Nueva prestación

2023-11-06

Danapad operations can now be detected by the Z-Wave gateway using notification IDs 5 and 6. A new Z-Wave configuration parameter (13) has been added to detect whether a Danapad is paired, along with parameter 14 for reading the battery level of a paired Danapad and parameter 15 for enabling or disabling easy locking from the Danapad (locking with a single button press).

The file system has been generally improved, and PIN-code time restrictions are now supported both from Z-Wave and from the smartphone. Enhancements have been made to prevent duplicate PIN codes, and an issue where Z-Wave Configuration CC parameters above 255 were not set correctly has been fixed. Additional general Z-Wave optimizations have also been implemented.

HomeKit Dual Mode Enhancements and calibration improvements Danalock V3Nueva prestación

2023-11-08

The Danalock HomeKit Dual Mode lock can now be added as a standard Danalock V3 in the Danalock apps while still functioning as a HomeKit lock. Support has been added for Danapad and Danabridge when the lock is added as a standard Danalock V3 in the apps, as well as support for inviting users to the Danalock cloud (my.danalock.com).

The auto-lock click command time has been adjusted from 15 to 20 seconds, and the Twist-Assist feature has been removed. Calibration has been generally optimized for Scandinavian lock cases, and lock operations are now blocked when the battery level drops below 25%.

This update also includes general HomeKit improvements, bug fixes, and security updates.

2023-11-14

Support for aliases on lock PIN codes has been added. The invitation flow has been updated, and the left-hand sidebar has been made more visible. A link to the Support site has been added via the question-mark icon. Tablet responsiveness has been improved, and an issue with the firmware tracker has been fixed.

Discontinuation of the Twist Assist Feature Danalock V3Modificación

2023-11-28

Auto lock will now be canceled if calibration is in progress, such as when calibrating using click commands. The Twist Assist feature has been removed.

Official announcement on the removal of the Twist Assist feature:

After careful consideration, support for the Twist Assist feature has been discontinued. The feature saw limited use, and we apologize for any inconvenience this can cause. Our commitment to delivering secure, high-quality products remains unchanged, and the Danalock V3 product line will continue to receive regular updates and improvements.