# Salto XS4 Face release notes November 2026
> XS4 Face release notes for November 2026 cover v-26.6.1 to v-26.6.9, including the expired license LED, server firewall changes, Salto KS license sync, and Space firewall rules.


## 2026-11-17 · v-26.6.9 {#v-26-6-9}

This release shows an expired site license on the XS4 Face Devices, changes the firewall that the XS4 Face Server installation configures, and improves user synchronization on the XS4 Face Server.

### Expired license shown on the device {{% label type="new" %}} {#expired-license-shown-on-the-device}

When the site license has expired, the XS4 Face Devices on the site now show a solid magenta light instead of white.
While the light is magenta, the device doesn't send access requests, so the door stays locked.
The device still reads QR codes, so you can still reset it with a QR reset.
When the site has a valid license again, the devices return to a white light.
For more information, see [XS4 Face Camera LED status reference](/xs4face/system-documents/hardware/device-status#normal-operational-responses).

### Firewall on the XS4 Face Server {{% label type="changed" %}} {#firewall-on-the-xs4-face-server}

The installation script for the XS4 Face Server now configures the server firewall with `ufw` instead of `firewalld`.
The firewall blocks all incoming traffic except HTTPS (`TCP/443`) and NTP (`UDP/123`), and SSH (`TCP/22`) when you allow remote SSH.
The script turns off `firewalld`.
It doesn't copy other ports that you opened in `firewalld` by hand, so open those ports again in `ufw` after you install or restore a server.
For more information, see [Firewall on the server](/xs4face/user-guide/systems-admin/server-installation#firewall-on-the-server).

### Customer handover checks {{% label type="changed" %}} {#customer-handover-checks}

XS4 Face now checks the customer handover conditions every time a license is applied to an **Installing** site, including when the license comes from the customer's subscription.
If the site doesn't meet a condition, XS4 Face doesn't license the site and reports which conditions are missing.
For more information, see [Customer handover](/xs4face/user-guide/systems-admin/licensing#customer-handover).

### Bug fixes {{% label type="fix" %}} {#v-26-6-9-bug-fixes}

- Fixed an issue where the XS4 Face Server requested the same face image several times when the photo could never pass validation, for example because it showed more than one face, no face, or a face turned too far from the camera.
  The server now stops at the first attempt, and tries again when the user provides a new photo.
- Fixed an issue where one user with a face image that hadn't arrived yet, or with invalid details, could delay the synchronization of other users to the XS4 Face Server.

## 2026-11-16 · v-26.6.8 {#v-26-6-8}

This release keeps the license of Salto KS sites up to date with the customer's Salto KS subscription and stops unnecessary XS4 Face Server restarts.

### Daily license sync for Salto KS sites {{% label type="new" %}} {#daily-license-sync-for-salto-ks-sites}

XS4 Face now updates the license of each site that uses the Salto KS integration once a day, overnight, from the XS4 Face feature in the customer's active Salto KS subscription.
The **User Limit** and **Expiration Date** of the site follow the subscription, and a renewed subscription reactivates a **Disabled** site overnight.
XS4 Face doesn't sync sites that are still **Installing**.
When the license of a Salto KS site expires, XS4 Face disables the site and sends one email to the site users and partner users that explains how to restore it.
For more information, see [Licenses for Salto KS sites](/xs4face/user-guide/systems-admin/licensing#licenses-for-salto-ks-sites).

### Enrollment after the license expires {{% label type="changed" %}} {#enrollment-after-the-license-expires}

For two days after the license of a site expires, XS4 Face still accepts new users from an access control integration and sends them an enrollment request.
Previously, XS4 Face rejected these users as soon as the license expired.
For more information, see [Site License](/xs4face/user-guide/systems-admin/licensing#site-license).

### Bug fixes {{% label type="fix" %}} {#v-26-6-8-bug-fixes}

- Fixed an issue where an XS4 Face Server restarted, and its doors were unavailable for about 20 seconds, when it received a certificate that it already had.
  For example, this happened after you applied a voucher to the site.

### Security improvements {{% label type="security" %}} {#v-26-6-8-security-improvements}

This release includes security improvements.

## 2026-11-12 · v-26.6.7 {#v-26-6-7}

This release opens the required Windows Firewall ports on the Space server, raises the free disk space that the XS4 Face Server installation needs to 40 GB, and improves the reliability of server and device updates.

### Firewall rules in the Space Install Script {{% label type="new" %}} {#firewall-rules-in-the-space-install-script}

The **Space Install Script** now adds inbound Windows Firewall rules on the Space server, so you no longer need to open these ports by hand.
The script allows SHIP traffic on the port in the **SALTO Authentication (SHIP Port)** field from the XS4 Face Server only, and HTTPS and NTP traffic from the local subnet.
If you change the SHIP port, run the script again to replace the rules.
For more information, see [Firewall rules on the Space server](/xs4face/user-guide/systems-admin/features/space#firewall-rules-on-the-space-server).

### Disk space for the XS4 Face Server {{% label type="changed" %}} {#disk-space-for-the-xs4-face-server}

The installation script for the XS4 Face Server now requires at least 40 GB of free disk space, instead of 8 GB.
If the root file system of the server uses LVM, the script first extends it to use all the unallocated space in its volume group.
This applies when you install or restore a server.
For more information, see [Advanced installation](/xs4face/user-guide/systems-admin/server-installation#advanced-installation).

### Vouchers on Salto KS sites {{% label type="changed" %}} {#vouchers-on-salto-ks-sites}

You can no longer apply a voucher to a site that uses the Salto KS integration.
The license for these sites comes from the customer's Salto KS subscription.
For more information, see [Site License](/xs4face/user-guide/systems-admin/licensing#site-license).

### Paced user synchronization {{% label type="changed" %}} {#paced-user-synchronization}

The XS4 Face Server now requests user face images from the cloud in small batches during user synchronization, instead of all at once.
The server runs a full user synchronization every 12 hours.
A server that has synchronized users before no longer runs it as soon as it starts, but at a random time within 12 hours of starting.
This reduces the load on the cloud when several servers restart at the same time.
A new server still synchronizes users as soon as it starts.

### Bug fixes {{% label type="fix" %}} {#v-26-6-7-bug-fixes}

- Fixed an issue where the XS4 Face Console could show an error after you created a site or saved another change, even though XS4 Face had saved the change.
- Fixed an issue where an XS4 Face Server without a valid IP address could stop other servers from receiving a software update.
- Fixed an issue where an XS4 Face Device that lost power during a software update couldn't install later updates.
  Devices also no longer restart in the middle of an update.
- Fixed an issue where an external system that uploaded a face image for a user received an unclear error when the Salto Privacy Policy wasn't accepted.
  XS4 Face now rejects the upload with a message that the Salto Privacy Policy must be accepted.

### Security improvements {{% label type="security" %}} {#v-26-6-7-security-improvements}

This release includes security improvements.

## 2026-11-05 · v-26.6.3 {#v-26-6-3}

This release denies access instead of reporting an error when an integration doesn't know a recognized user, and improves user synchronization on the XS4 Face Server.

### Access denied for users unknown to the integration {{% label type="changed" %}} {#access-denied-for-users-unknown-to-the-integration}

When an XS4 Face Device recognizes a face, but the integration that the device is paired with has no matching user, XS4 Face now denies access.
For example, this happens when a user from Salto Space presents their face at a device paired with a GT7 control point, but the user doesn't exist in GT7.
The device shows a red light, and the **Access Logs** record the attempt as denied, with the control point and the reason from the integration.
Previously, XS4 Face reported these attempts as an error.
This applies to the Space, KS, GT7 and Enviso integrations.
For more information, see [Using more than one access control integration](/xs4face/user-guide/systems-admin/features#using-more-than-one-access-control-integration).

### Bug fixes {{% label type="fix" %}} {#v-26-6-3-bug-fixes}

- Fixed an issue where user synchronization could keep requesting a face image for a user that the XS4 Face Server had already enrolled.
  The server now keeps these users enrolled.
- Fixed an issue where an external system that requested the users of an integration without specifying a page size received no users.

## 2026-11-02 · v-26.6.1 {#v-26-6-1}

Maintenance and reliability improvements.

