# Intercom Config page
> A guide to the Intercom Config page in XS4 Com.


On the **Intercom Config** tab under **Site**, site owners and site admins can configure the phonebook display of a site's XS4 Com entrances (iGO and iPanel).
On this page, they can also add new entrances to the site by clicking the **Add entrance** button on the top right corner.
This opens the same pop-up window installers use when creating a site, as described in [Adding an entrance](/xs4com/user-guide/installer/create-site#add-entrance-access-control-integration).
The difference is that the **Access control integration** and **Site** fields will be prefilled with the information of the existing site they are on, as only installers have the permission rights to change these fields.

Clicking on a specific entrance will take the site owners and site admins to the dedicated page of that XS4 Com entrance.
On this page, they will see four chips they can click on and switch between: **Welcome Screen**, **Phonebook Display**, **Call Properties**, **Entrance Config**, and **Panel Settings**.
Clicking on each chip will display a different screen with the settings that can be configured or customized for that option.

## Welcome Screen {#welcome-screen}

The **Welcome Screen** chip displays the settings that can be configured on the welcome screen of XS4 Com entrances (iGO and iPanel).
If enabled by the site owner or site admin, the welcome screen is the first thing the visitor sees when scanning a QR code or tapping an NFC-enabled plate (iGO), or arriving at an intercom panel (iPanel).

The welcome screen can be enabled or disabled for an entrance.
If disabled, the visitors will directly see the phonebook display.
If enabled, site owners and site admins can customize the welcome screen as they wish, according to the following options:

- Choose between using the **Default Background Image** or **Upload a Custom Image**, which must be less than 11 MB.
  The recommended dimensions for the image are 1920px by 1080px.
- Determine the **Building Details Settings**, which are displayed on the welcome screen, by selecting **Display Site Name & Address**, **Display Site Name Only**, or **Display Address Only**.
- Enable up to three **Call Options**, which are predefined options or categories for calling in XS4 Com: **Reception**, **Deliveries**, and **Security**.
  Site owners and site admins can assign one or multiple residents to these options, allowing the call to be routed to all assigned residents instead of doing an individual call.

On the right-hand side of the page, a phone mockup shows a preview of the welcome screen, which updates in real time as the site owner or site admin chooses between the different customization options.

{{% info-panel %}}
For iGO entrances, the default language will be set based on the visitor's browser locale.
For iPanel entrances, the default language is set by the installer or site owner/site admin when adding that entrance to the site.
{{% /info-panel %}}

![Welcome Screen](images/welcome-screen.png "Overview of the Welcome Screen chip")

## Phonebook Display {#phonebook-display}

The **Phonebook Display** chip displays the settings that can be configured on the phonebook screen of XS4 Com entrances (iGO and iPanel).
If the welcome screen has been enabled for that entrance, the **Building Details Settings** line will be disabled and grayed out, as this information will already have been defined on the **Welcome Screen** chip.
The **Phonebook Display** chip cannot be disabled.

Site owners and site admins can customize the phonebook display as they wish, according to the following options:

- **Phonebook Display Settings**: Determine how the list of residents should be displayed on the phonebook by selecting **Display List as Collapsed** or **Display List as Expanded**.
  The first will make the phonebook more compact by hiding the residents in the tabs of the units they belong to, and visitors will have to click on a specific unit tab to see its list of residents.
  The second will expand the phonebook by displaying all residents in one page, grouping them according to the unit they belong to.
- **Resident Display Settings**: Choose how residents should be named on the phonebook by selecting **Display Resident Full Name**, **Display Initial and Last Name**, and **Display Initials Only**.
- **Resident Sorting**: Sort the list of residents within each unit group according to a specific criterion by selecting **By first name from a-z**, **By first name from z-a**, **By last name from a-z**, **By last name from z-a**, or **By date added**.

On the right-hand side of the page, a phone mockup shows a live preview of the phonebook, updating in real time as the site owner or site admin selects different customization options.

![Phonebook Display](images/phonebook-display.png "Overview of the Phonebook Display chip")

## Call Properties {#call-properties}

The **Call Properties** chip displays the settings that can be configured for calls in XS4 Com (iGO and iPanel).
Site owners and site admins can configure the following options:

- **Call Duration**: Choose between **30 seconds**, **40 seconds**, **1 minute**, **01:30 minutes**, or **2 minutes** as the maximum duration of time for calls, counted from the moment the resident picks up the call.
- **Call Ring Timeout**: In the case of unanswered calls, determine the set limit of time for a call to ring before it stops, counted from the moment the visitor initiates the call.
  Choose between **30 seconds**, **40 seconds**, **1 minute**, **01:30 minutes**, or **2 minutes**.
- **Enable/Disable Live Captions**, which are real-time captions of the call that occurs between visitors and residents.
  Live Captions are enabled by default for an XS4 Com entrance, allowing visitors and residents to turn the feature on by pressing the captions icon in the call menu.
  When the feature is on, captions are only visible to the person who has turned them on.
- **Choose and Set Waiting Tone**: Select the tone visitors will listen to while waiting for the resident to pick up their call, choosing from a generic dial tone or the standard tones for Europe, the UK, or the US.

![Call Properties](images/call-properties.png "Overview of the Call Properties chip")

## Entrance Config {#entrance-config}

The **Entrance Config** chip displays the settings that can be configured on an XS4 Com entrance.
Some settings cannot be changed and remain the same as what was configured for that entrance at the time it was added to the site.
These are: the **Access Control integration** (Salto KS, Homelok, or ACA), the **Site**, the **Intercom Type** (iGO or iPanel), and the **Unique Intercom code** of that entrance.

Other settings displayed on this chip can be edited and changed by site owners and site admins at any point after the entrance was added, including:

- The **Entrance Name**.
- The **Lock** the entrance is associated with.
  To be able to see the list of locks used at the entrances of that KS, Homelok or ACA site, site owners and site admins need to make sure they belong to that site.
- **Enable or disable geofencing**, in the case of XS4 Com iGO entrances.
  If enabling it, set the desired radius.
  Visitors will be asked to share their location before making a call with their phone.
  If the location is outside of the set radius, the call will be rejected.

![Entrance Config](images/entrance-config.png "Overview of the Entrance Config chip")

## Panel Settings {#panel-settings}

The **Panel Settings** chip is enabled for XS4 Com iPanel entrances only and displays the settings that can be configured on the intercom panel device.
These are: **Audio Settings** and **Display Settings**.

In **Audio Settings**, site owners and site admins can:

- **Enable Echo Cancellation**, which will prevent the speaker's voice from feeding back into the microphone and looping back as delayed echo.
- Adjust the **Speaker Volume** by moving the slider, choosing a value between **0** and **100**.
- Adjust the **Microphone Gain** by moving the slider, choosing a value between **0** and **100**.

In **Display Settings**, site owners and site admins can:

- Enable **Manual Brightness Control** of the intercom panel screen.
  If left disabled, brightness control will be set to automatic.
- If enabled for manual control, adjust the **Brightness** by moving the slider, choosing a value between **0** and **100%**.
- Adjust the **Detection Range** by moving the slider between **Near**, **Middle** and **Far**.
  This setting will determine how far away the panel will detect the person and automatically switch on.
- Adjust the **Screen Timeout** by moving the slider, choosing a value between **2 min** and **10 min**.
  This setting will determine how long the panel screen will stay on after the person moves away.

![Panel Settings](images/panel-settings.png "Overview of the Panel Settings chip")

