Z-Wave
The Danalock V3 BTZE (Z-Wave) version can be used in the Danalock app, with a smart hub, or with both at the same time.
If you want to use your Danalock V3 BTZE both in the Danalock app and with a Z-Wave compatible smart hub, it's important to add the lock in the Danalock app first. If you add the lock to the smart hub before adding it in the app, the Bluetooth function will be disabled.
Danalock V3 Z-Wave
Inclusion
Below you can find a step-by-step guide on how to include your Danalock V3 BTZE to a Z-Wave compatible smart hub:
Set your smart hub in inclusion mode.
Press the pinhole button on the lock once while keeping it close to the hub.
After the click, the lock will flash green for up to 30 seconds as the inclusion process begins. Even after the flashing stops, the hub may still be completing the inclusion. Wait until the process is complete.
Once the lock has been included, you can control it through your hub.
If you don't know how to set your smart hub in inclusion or exclusion mode, check the hub's manual.
Exclusion
Below you can find a step-by-step guide on how to exclude your Danalock V3 BTZE from a smart hub:
Set your smart hub in exclusion mode.
Press the pinhole button on the lock once while keeping it close to the hub.
If you don't have the smart hub the lock was originally included with, you can set another Z-Wave compatible smart hub in exclusion mode and click the pinhole button on the lock once. This will exclude the lock and re-enable the Bluetooth signal.
App-less pairing
If you have a Danapad as well and want to set PIN codes via your smart hub, you can make an app-less pairing of the Danalock and the Danapad. You can find further information and detailed instructions on how to make the pairing in the App-less pairing guide.
Compatible smart hubs
Below is a list of smart hubs that we can confirm are compatible with the Danalock V3 BTZE:
- Aeotec Smart Home Hub (third generation smarthub).
- Alarm.com platforms.
- Athom Homey, Homey Pro, Homey Bridge.
- Climax (ADC platform).
- Fibaro Home Center 2, 3, and Lite versions.
- Future Home.
- Home Assistant with Z-Wave JS UI.
- Hubitat.
- Jeedom.
- Qolsys - Johnson Controls (ADC platform).
- SmartThings V3, Aeotec Smart Home Hub.
- Yubii Home (Fibaro).
If your smart hub isn't listed above, please contact our support team at danalocksupport@saltosystems.com and include the name and model of your smart hub.
Our team can confirm whether your hub is compatible.
Atrás
